Gear Motors for Base Station Cabinet Lock

Nowadays, the theft of battery packs, cables, copper bars, air conditioners, etc. in the base station has occurred frequently. Why not have a base station cabinet with gear motors from ZHAOWEI?

Driven by the 5G communication system, the number of base stations and computer rooms is increasing, and the mobile phone signals are getting better and better, but the theft of battery packs, cables, copper bars, air conditioners, etc. in the base station has occurred frequently. This not only causes major economic losses to network operators, but also leads to communication and network interruptions, causing huge indirect economic losses to the society, and causing headaches for communication maintenance engineers. How to effectively solve the security of unattended base stations, computer rooms and other site equipment has become an urgent problem to be solved. Most of the communication base stations are installed outdoors, and usually, the base station contains a lot of cabinets. Existing base station cabinets use ordinary mechanical locks for anti-theft, but this is easy to be stolen, especially for monitoring personnel, and it is difficult to monitor by the monitoring personnel. For the existing safety performance, in addition to our gearbox solution for base station antenna, we also design and develop a gear motor solution for smart lock of base station cabinet, solving the defects of poor anti-theft performance and untimely monitoring in the prior art.

ZHAOWEI Gear Motors for Base Station Cabinet
In order to improve the reliability of unlocking and locking of smart lock of base station cabinet, ZHAOWEI uses planetary gearboxes to achieve the transmission demand of small volume and high torque. In the early stages of design, we can produce gearboxes of two-stage, three-stage, four-stage, and the reduction ratio, input speed, torque and other technical parameters can be customized according to your design requirements of the base station cabinet lock. Once the information is transmitted, the corresponding feedback will be sent by issuing various commands to the circuit board that can accept the Bluetooth information. Then the motor starts to drive the gear as well as the straight rack, and pushes the bolt up and down, enabling the switch function.

Safety
No matter how smart the lock is, security is the initial and basic requirement. ZHAOWEI gear motors for base station intelligent lock motor control system can directly cooperate with the lock cylinder to form the smart lock control board behind the system, and it has taken special defense measures against electromagnetic interference, and tested through different power electromagnetic interference and various failure analysis, achieving anti-interference and anti-magnetic performance.

Remote Control
The communication company can perform remote control and remote adjustment for distributed and wide-area independent base station equipment room environments, monitor the operating status of the equipment, monitor the environmental status of the equipment room, and record and process-related data. The base station smart lock motor gearbox solution is authorized by the management software + APP to collect and save each record of the lock operation to solve the above problem.

The Base Station Cabinet lock is based on embedded technology and collects data through IoT sensors such as RFID, and then transmits the collected data to the controller for processing. After processing, the entire terminal is operated through various sensors, including GSM SMS reminder, RFID identification and more to detect security alarms in time and remind relevant personnel to handle problems, so as to realize the security information management of base station operations.