CPAP Machine Motor

August 19, 2021

CPAP Machine Motor

As the world is struck by the pandemic, there’s been a sharp increase in the need for CPAP machines to treat patients with difficulty in breathing. ZHAOWEI can provide gear motor solutions for not only CPAP machines, but also other medical devices…

 

What is CPAP?
CPAP, the abbreviation for continuous positive airway pressure, is a form of positive airway pressure (PAP) ventilation. CPAP therapy is widely used in the treatment of obstructive sleep apnea (OSA), and pre-term infants whose lungs have not fully developed to supply enough oxygen and support breathing.

 

The CPAP machine is basically a small box that has a motorized fan inside. The fan, driven by a gear motor, quietly draws air from the room through a filter and gently pressurizes it to send the air to users. Another key component is the mask, which consists of frame, cushion, and headgear. There is a tube to connect the motor and mask, passing the air through a heated humidifier and then delivering it to the mask interface.

 

latest company case about CPAP Machine Motor  0

 

22mm BLDC motors by ZHAOWEI
ZHAOWEI 22mm brushless DC gear motors are suitable for the CPAP machine. The BLDC gear motors are characterized by low vibration and low noise, which will not affect the user’s sleeping quality. In continuous operation, the motors can satisfy the requirement of medical devices with high-performance bearing and high efficiency that up to 90%. A controller is attached with the brushless motor to precisely control the running speed and output voltage.

 

ZHAOWEI Machinery & Electronics Co., Ltd provides a set of customized development services. The customized technical parameters provided by ZHAOWEI are shown below:
Diameter: 3.4mm-38 mm
Voltage: ﹤24V
Output power: ﹤50W
Output speed: 5-2000rpm
Gear ratio: 2-2000
Output torque: 1.0gf.cm -50kgf.cm

22mm metal motorOutlook
The intelligence of a single product is the initial stage of intelligent medical electronics drives. The coordinated linkage between products can create a better user experience. In this regard, ZHAOWEI R&D center of gear motor for the medical devices. ZHAOWEI has developed and designed corresponding products for the insulin pump, smart infusion pump, self-coagulation knife, surgical stapling device, orthopedic surgery lavage system, etc. The transmission gear drive system truly realizes the broader layout of the smart kitchen and promotes the smart kitchen strategy.